Overview:
This project is an attempt to create an evaluation board using high performance ARM9 processor.
Construction:
The board is build round Atmel AT91SAM9260 processor running at 200MHz with two SDRAM modules of total 64Mb running at 100MHz and 1Gb NAND flash. The visualization of designed 4-layer PCB can be seen below.
Peripherals:
- Ethernet
- GSM
- ZigBee
- USB Host and Device
- uSD
- Optoisolated RS232 and RS485
- Extension slot with I2C, SPI, GPIO
Operating system:
The processor is running OpenWRT linux distribution with 2.6.29.3 kernel.
Visit my Guestbook, read my CV.
Disclaimer.
This site is a member of WebRing. To browse visit here.
Powered by elektroda.pl.